Pleasant Hearth OFG419T Manual Del Usuario página 13

ASSEMBLY INSTRUCTIONS
9. Burner Installation
9-1. Line up holes in the burner assembly (B) with
corresponding holes in the table assembly. Insert
four M5 X 12 screws (EE) through holes. Fasten
them. The control knob should face the front side
of the unit, the same as the door.
Hardware Used
EE
Screw M5 X 12
FF
Philips screwdriver
9-2.The total assembly parts will look like the figure 9-2.
10 - 1. Attach the knob (M) on the table lid (A) with one
M4 X 5 screw (AA). Put glass rock (one pack) (O)
above the burner and put the table lid above the
burner assembly (B). Do not cover ignition screen
with glass rocks.
Caution: Never place a table lid on the
has cooled before placing a table lid over
Hardware Used
AA
Screw M4 X 5
FF Philips screwdriver
9-1
x 4
x 1
9-2
10-1
O
O
x 1
x 1
13
EE
M
AA
B
B
A
A