General; Mig/Mag Series Torches; Digimig - Mig/Mag Series Torches; Push-Pull Series Torches - voestalpine Bohler URANOS 2700 MTE Instrucciones De Uso

4.7 ST... U/D series torches
The U/D series torches are digital TIG torches allowing the main
welding parameters to be controlled:
- welding current
- program recall
(Consult the "Set up" section).
"Consult the instruction manual".
1 Torch button
2 "Up" button
3 "Down" button
4.8 ST...DIGITIG series torches

4.8.1 General

The DIGITIG series torches are digital TIG torches allowing the
main welding parameters to be controlled:
- welding current
- program recall
Parameters 3-4 can be personalised.

4.9 MIG/MAG series torches

1 Torch button
"Consult the instruction manual".
54

4.10 DIGIMIG - MIG/MAG series torches

The MB501D PLUS series torches are digital MIG/MAG torches
allowing the main welding parameters to be controlled:
- welding current (Synergic MIG/MAG process)
- arc length (Synergic MIG/MAG process)
- wire speed (Manual MIG/MAG process)
- welding voltage (Manual MIG/MAG process)
- program recall
and the real values to be displayed for:
- welding current
- welding voltage

4.11 Push-Pull series torches

1 Torch button
"Consult the instruction manual".

4.12 Push-Pull kit (73.11.024)

"Consult the "Installation kit/accessories" section".

5 MAINTENANCE

Routine maintenance must be carried out on the
system according to the manufacturer's instruc-
tions.
Any maintenance operation must be performed by qualified
personnel only.
When the equipment is working, all the access and operating
doors and covers must be closed and locked.
Unauthorized changes to the system are strictly forbidden.
Prevent conductive dust from accumulating near the louvers
and over them.
Disconnect the power supply before every opera-
tion!