Replacing Defective Fuse - Medela Dominant Flex Instrucciones De Uso

12 Replacing defective fuse

WARNINGS
Before replacing the fuse, pull the mains plug out of the fixed mains socket�
1�
2�
3� Replace the defective fuse(s)� Make sure that the technical specifications are correct�
T 1.6 AH, 250 VAC, 5 x 20 mm
4�
5�
1�1 Disconnect the Dominant Flex from the mains�
1�2 If attached, remove the cable holder (2 screws on bottom)�
2�1 Open (pull out) the fuse holder on the back of the Dominant
Flex�
4�1 Close (push back) the fuse holder�
5�1 Reconnect the Dominant Flex to the mains again�
5�2 Switch on the Dominant Flex again�
Replacing defective fuse
| 25