ProTeam ProGuard LI 3 Manual Del Propietário página 14

MAINTENANCE
Refer to "Filter Assembly/Replacement"
Section of this manual .
Allow the filter to dry before reinstalling
and storing the Vacuum .
Cleaning and Disinfecting the
Wet/Dry Vacuum
To keep your Wet/Dry Vacuum looking
its best, clean the outside with a cloth
dampened with warm water and mild
soap (Figure M) .
To clean the drum:
1 . Dump out debris .
2 . Wash drum thoroughly with warm
water and mild soap .
3 . Wipe out with dry cloth .
Before prolonged storage or as needed (e .g ., waste water pick up) the drum should
be disinfected .
To disinfect the drum:
1 . Pour 1 gallon of water and 1 teaspoon of chlorine bleach into the drum .
2 . Let solution stand for 20 minutes, carefully swishing every few minutes, making
sure to wet all inside surfaces of the drum .
3 . Empty drum after 20 minutes . Rinse with water until bleach smell is gone . Allow
drum to dry completely before sealing the motor on the drum .
WARNING - To assure product SAFETY and RELIABILITY, repairs and adjustments
!
should be performed by Authorized Service Centers, always using ProTeam
replacement parts .
14
(Continued)
Dampened
Cloth
Vacuum
Assembly
Figure M
ProTeam