colorieter to perform, such as scan blank and scan sample. The keypad is used to
make menu selections that are viewed on the display.
THE KEYPAD
The keypad has 6 buttons which are used to perform specific tasks.
This button will scroll up through a list of menu selections.
The button is used to select choices in a menu viewed on the display.
ENTER
This button controls the backlight on the display.
This button will scroll down through a list of menu selections.
This button exits to the previous menu.
EXIT
This button turns the meter on or off.
ENTER
EXIT
THE DISPLAY AND MENUS
The display allows menu selections to be viewed and selected. These selections
instruct the colorimeter to perform specific tasks. The menus are viewed in the
display using two general formats that are followed from one menu to the next.
Each menu is a list of choices or selections.
The display has a header line at the top and a footer line at the bottom. The header
displays the title of the current menu. The footer line displays the time and the date,
the data logger status and the battery status. The menu selection window is in the
middle of the display between the header and the footer.
The menu selection window displays information in two general formats. In the first
format only menu selections are displayed. Up to 4 lines of menu selections may be
displayed. If more selections are available they can be viewed by pressing the arrow
buttons
window. Think of the menu selections as a vertical list in the display that moves up
or down each time an arrow button
colorimeter are looping menus. The top and bottom menu choices are connected in
a loop. Scrolling down past the bottom of the menu will lead to the top of the menu.
Scrolling up past the top of the menu will lead to the bottom of the menu.
Main Window Selection First Choice
to scroll the other menu selections into the menu selection
Header
Footer
is pressed. Some menus in the
Menu Title
Second Choice
Third Choice
Another
12:00:00
And Another
And So On
19
001/500
P