Using The Call Menu Features - Toyota Bluetooth SWC Manual Del Propietário

Placing a call using memory dial
Speak memory dial numbers as continuous digits. For example, dictate memory dial location 22 as
"2-2", not "twenty-two."
1 Press and hold the MODE button.
The hands-free system responds: Phone menu. {Say a command}.
2 When prompted, say "MEMORY DIAL".
The hands-free system responds: Memory dial number please.
 Recite the memory dial number.
The hands-free system repeats the number it heard and asks: Is this correct?
4 If the number recited is correct, say "YES".
The hands-free system responds: Dialling and places the call.
Using the Handset Device
You can dial a hands-free call directly from your handset device in the normal manner.

4.7. Using the call menu features

A call must be in progress to use these features.
Adjusting the hands-free call volume
During a hands-free call, press and release a VOLUME UP/DOWN button to increase/decrease the
call volume by a single level.
Tones are played to indicate when the maximum and minimum volumes are reached.
Ending the call
1 Press and hold the MODE button.
The hands-free system responds: Call menu. {Say a command}.
2 When prompted, say "HANG UP".
The hands-free system responds: Call ended.
Or use the SWC: During a call, a press and release of the ARROW DOWN button will end the
call.
Muting the call
1 Press and hold the MODE button.
The hands-free system responds: Call menu. {Say a command}.
2 When prompted, say "MUTE".
The hands-free system responds: Call muted.
Or use the SWC: During a call, a press and hold of either VOLUME button will mute the
microphone.
Bluetooth SWC 19
®