Automatic Connection - Toyota Bluetooth SWC Manual Del Propietário

1 Your handset device's Bluetooth
you must first turn on the Bluetooth
2 Press and hold the MODE button.
The hands-free system responds: Setup menu, please say a command.
 Perform a device discovery from the handset device. For details on device discovery for your
handset device, refer to the handset device's user's guide.
Your handset device will search for any Bluetooth
complete, it will display a list of the devices it finds. Searching may take a minute or two to
complete.
4 Select Toyota from the list of devices.
5 If prompted by the handset device, enter the passkey 0000, and press the OK key.
6 The hands-free system responds: Pairing complete. Please say a friendly name for the device.
Say a friendly device name for your handset device. For example, you can say 'Jenny's Phone'.
7 The hands-free system responds: <device name> added.
Some handset devices may ask you to accept the Bluetooth
8 After a few seconds the hands-free system responds: Connection complete.

4.4. Automatic connection

After initial pairing, every time you start your vehicle, your handset device and hands-free system
will automatically be connected (if your handset device is powered on and the relevant Bluetooth
settings are not changed).
If you start your vehicle, and your handset device is not present, the hands-free system will
automatically try to connect to other handset devices present in the device list.
When the wireless connection is established, the hands-free system responds: <device name>
connected.
feature is off by default. To use your car hands-free system,
®
feature in your device.
®
devices around it. When the search is
®
link. Enter YES.
®
Bluetooth
®
SWC 1
®