Installing The Battery - Pulsar AXION XM30S Guia De Inicio Rapido

LED Indicator * Battery charge status
Battery charge from 0 % to 10 %.
Charger not connected to the mains power supply.
Battery charge from 0 % to 10 %.
Charger connected to the mains power supply.
Battery defective. Battery should not be used.
Battery charge from 10 % to 20 %.
Battery charge from 20 % to 60 %.
Battery charge from 60 % to 95 %.
Battery completely charged.
Can be disconnected from the charger.
* The LED indicator displays the current level of charge of the battery for
30 seconds when the APS charger is not plugged in. When the power is
connected, the display shows the current status of the battery constantly,
the LEDs additionally flickering to indicate the battery charging process.

Installing the battery

• Insert the battery (10) into the assigned slot on the instrument's casing (14) (see
Fig. 4), aligning the images to form a 'dot' on the instrument and the battery.
• When properly installed, the battery is locked into the slot with a special clip.
• To remove the battery from the device, press the Battery Release button (9).
Fig.
4
Stream Vision App
Download the Stream Vision app to stream the image via Wi-Fi from your AXION
unit to a smartphone or tablet.
Detailed instructions are available on the Internet at: www.pulsar-vision.com
Battery Slot
14
9
Battery
release
button
Battery
10
Pack
ENGLISH
4