Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SPECIAL WARNINGS
• DO NOT reach for an appliance that has fallen into water. Unplug it
immediately.
• DO NOT use while bathing or showering. Use only in a dry area.
• DO NOT place or store appliance where it can fall or be pulled into a tub or
sink. DO NOT place in or drop into water or other liquid.
• DO NOT attempt to plug or unplug unit while feet are in the water.
• Use appliance on a sturdy or level surface.
• If you have any concerns regarding your health, consult your doctor before
using your HoMedics footbath.
• Consult your doctor before using in case of illness or medical condition,
including but not limited to pacemaker use and pregnancy.
• We recommend using this unit for no longer than 30 minutes at a time.
Extensive use could cause the product to overheat. Should this occur,
discontinue use and allow the unit to cool before operating.
• If you experience pain in a muscle or joint for a prolonged period of time,
discontinue use and consult your doctor. Persistent pain could be a symptom
of a more serious condition.
• NEVER use any footbath on open wounds, discolored areas, or any area of
the body that is swollen, burned, inflamed or where skin eruptions or sores
are present.
• Use of this product should be pleasant and comfortable. Should pain or
discomfort result, discontinue use and consult your physician.
• NEVER use while sleeping or drowsy.
• Always unplug the unit when filling or moving the unit.
• Ensure that your hands are dry when operating the controls or removing
the plug.
• This product should NEVER be used by any individual suffering from any
ailments that would limit the user's capacity to operate the controls.
• This product should NEVER be used by any individual suffering from any
ailments that would limit or altogether inhibit the user's capacity to feel or
have any sensation in the body part that the product is being used for.
4
Grounding Instructions
This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for the
Grounding Pin
electric current to reduce the risk of electric shock. This product is
Figure A
equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
DANGER
Tab for
Improper connection of the equipment-grounding conductor
Grounding
Adapter
Screw
can result in a risk of electric shock. Check with a qualified
Figure B
electrician or serviceman if you are in doubt as to whether
the product is properly grounded. Do not modify the plug
Grounded
provided with the product - if it will not fit the outlet, you may
Outlet
temporarily use an adaptor (such as the one shown in Figure
B) until you have a proper outlet (such as the one shown in
Figure C) installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a
Figure C
grounding plug that looks like the plug illustrated in Figure A.
A temporary adapter that looks like the adapter illustrated in
Figure B may be used to connect this plug to a 2-pole receptacle
as shown in Figure D if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly
grounded outlet Figure C can be installed by a qualified electrician.
Metal Screw
The tab for grounding screw Figure B extending from the adapter
Figure D
must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must
be held in place by a metal screw. S S e e e e F F i i g g u u r r e e s s D D a a n n d d E E . .
Figure E
5
Tabla de contenido
