Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SAVE THESE INSTRUCTIONS
Caution:
All servicing of
this this unit
Caution: Please read all instructions
must be
carefully before operating.
performed by
SPECIAL WARNINGS:
authorized
HoMedics
• Do not insert any object, or material, into this unit or power
service
pack.
personnel only.
• This unit is not a toy. Children should not use or play with it.
• Always unplug the unit when not in use and when cleaning or
moving the unit.
• Ensure that your hands are dry when operating the switch or
removing the plug.
• Do not cover this unit or power pack with any type of material
while it is in operation.
• Do not use if you have sensitive skin areas or poor circulation.
Use by unattended children or incapacitated persons may be
dangerous.
• Do not use while sleeping or drowsy.
• Do not use this unit for more than 20 minutes.
• Do not use on the walls of inflatable tubs or pools.
Medical Precautions
• This unit should not be used in the following cases:
Tuberculosis, benign and malignant tumors, hemmorages,
inflammations of the skin, phlebitis and thrombosis, open and
fresh wounds, bruises, broken skin or varicose veins, or
undetermined calf pain.
• Consult your physician if you have any questions regarding
therapeutic use of this unit.
• Do not use on any part of the body that is anesthetized.
• Do not use on any part of the body where surgery has
been performed.
• Do not use on any unexplained pain before consulting your
doctor.
• If you have any concerns regarding your health, consult your
doctor before using this product.
4
Features
• Powerful swirls of water massage away stress
• Unique design easily adheres to any tub surface
• Choose from gentle bubbles to powerful jet streams
Installation Instructions
1. Be sure that the this unit is off and the tub is empty.
2. Dampen all 3 suction cups to improve grip.
3. Place the unit inside the tub (See Figure 1).
4. Secure suction cups to tub by firmly pressing on the front of
this unit.
Figure 1
Instructions For Use:
1. Place this unit in the tub by using the previous installation
instructions on page 4.
2. Connect adaptor to power cord then insert plug into 120 V
household outlet.
3. Fill the bath tub with water to the line indicated on the unit
OFF
ON
(See Figure 2).
4. Press the "on" button and set the control to the desired
setting (jet stream or bubbles) (See Figure 3).
FILL LINE
CAUTION: If this unit falls into the tub during use do not panic.
This unit has been designed to withstand submersion for short
periods of time without danger. Remove unit from tub
immediately and press off button. Unplug from outlet. Remove
the unit from the water and hold it over tub, rotating gently to
Figure 2
remove excess water from housing. When water is completely
emptied from this unit, reinstall this unit per operating
instructions.
Figure 3
5
Tabla de contenido
