Included Items; Technical Information; General Safety Advice For Electrical Power Tools; Workplace Safety - Parkside PWS 230 SE Instrucciones De Utilización Y De Seguridad

Coded groove (see Fig. G)
16
Spanner
17
Roughing / grinding disk*
18
Cutting disc for metal*
19
Cutting disc for masonry*
20
* not included

Included items

Q
1 Angle grinder PWS 230 SE
1 Auxiliary handle
1 Disc guard cover
1 Spanner
1 operating instructions

technical information

Q
Rated voltage:
Rated power consumption: 2.000 W
No-load speed:
Grinding disc:
Mounting spindle:
Protection class:
Noise and vibration data:
Values determined in accordance with EN 50144.
The sound pressure level (A-weighted) of the device
is typically 92 dB (A). Uncertainty K = 3 dB. The
sound level while working can exceed 108 dB (A).
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration a
h
Uncertainty K = 1,5 m / s
Introduction / General safety advice for electrical power tools
230 V ~ 50 Hz
n 6.500 min -1
0
Ø 230 mm
M14 / threaded
II /
= 11,95 m / s 2
2
General safety advice
for electrical power tools
read all the safety advice
WArNING!
and instructions! Failure to observe the safety
advice and instructions may result in electric shock,
fire and / or serious injury.
KEEP ALL THE SAFETY ADVICE AND INSTRUC-
TIONS IN A SAFE PLACE FOR FUTURE REFER-
ENCE! THE TERM "ELECTRICAL TOOL" USED
IN THE SAFETY ADVICE REFERS TO ELECTRICAL
TOOLS POWERED BY MAINS ELECTRICITY (BY
MEANS OF A MAINS LEAD) AND ELECTRICAL
TOOLS POWERED BY RECHARGEABLE BATTER-
IES (WITHOUT A MAINS LEAD).

1. Workplace safety

a) Keep your working area clean and
well lit. Untidy or poorly lit working areas
can lead to accidents.
b) Do not work with the device
in potentially explosive envi-
ronments in which there
are inflammable liquids, gases or
dusts. Electrical power tools create sparks,
which can ignite dusts or fumes.
Keep children and other peo-
c)
ple away while you are op-
erating the electrical tool.
Distractions can cause you to lose control of
the device.

2. Electrical safety

to avoid danger to
life from electric shock:
a) the mains plug on the device must match
the mains socket. the plug must not
be modified in any way. Do not use
an adapter plug with devices fitted
with a protective earth. Unmodified
plugs and matching sockets reduce the risk of
electric shock.
GB/MT 37