Fitting The Header Assembly - NAMCO WORLD KICKS Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
5-1

Fitting the Header Assembly

The Header Assembly has a forward centre of gravity, so it is important that at
least two people are used to fit or remove the Header Assembly.
The fitting position of the Header Assembly is high, and it is important that a
means of reaching the height safely, without stretching, is available. (e.g. Steps,
Step Stool etc.)
1.
Place the Header Assy on to the Monitor Cabinet and slide the Header Assy
backwards so that the Header Support Tube engages under the Header
Retaining Brackets.
Hex head screw
(M8x40)
Header Retaining Bracket
Connector Bracket
2.
Fit 4off hex headscrew (M8x40) to retain the Header Assy to the Monitor Cabinet.
3.
Connect the connector.
4.
Fit the Connector Bracket using 1off socket button head screw (M5x10).
Header Assy
Socket button head screw
Page 38
(M5x10)
Connector
Tabla de contenido
loading

Tabla de contenido