2.
Disconnect the connectors from the Start switches.
3.
Disconnect the Joystick assembly connector, and remove the Joystick assembly.
Horizontal direction
potentiometer
Start switch
Connectors
Vertical direction
potentiometer
Connector
4.
Reassemble in reverse order.
Note: When refitting the Joystick assembly ensure that the horizontal direction
potentiometer is at the front and the vertical direction potentiometer is on the
left-hand side.
After replacing, always check the operation and settings.
Connectors
Page 68
Joystick cover
Joystick assy
(see 6-2-3 (d) page 51)