Replacing The Kicker Spring And/Or Stop Bumpers - NAMCO WORLD KICKS Manual De Instrucciones

8-5

Replacing the Kicker Spring and/or Stop Bumpers

1. Remove the Kicker Arm.
2. Remove the Spring and the two Spring Ends.
3. Remove 1off Whizz nut (M6) and remove the Spring Shaft.
Spring ends
Spring
4. Remove the Whizz nut (M8) and remove the End Stop Bumper.
End stop
bumper
Cutaway section
Kicker Assy
5. Replace the End Stop Bumper.
Note: When refitting the End Stop Bumper ensure that the cutaway section of the
End Stop Bumper aligns with the plate inside the Kicker Assy.
(see 8-4 steps 1-4 page 63)
Spring shaft
End stop bumper
Page 65
Whizz nut
(M6)
Align cutaway
with internal plate.
Whizz nut
(M8)