Replacing The Kicker Sensors - NAMCO WORLD KICKS Manual De Instrucciones

8-3

Replacing the Kicker Sensors

1. Remove the Kicker Assembly.
2. Remove 2off pozi head screws (M4x8) and remove the sensor bracket, with
sensors.
3. Disconnect the connector from the sensor to be replaced.
4. Remove 1off pozi head screw (M3x16) and remove the sensor.
NOTE
Grey face
of sensor must
face outwards
Pozi head screw
(M4x8)
Pozi head screw
(M3x16)
5. Reassemble in reverse order.
Note: When reassembling ensure that the grey face of the sensor faces outwards,
the earth tag is refitted, and the connectors are fitted to the correct sensor.
Connector
(White)
Earth tag
Page 62
(see 8-2 page 60)
Sensor bracket
Connector
(Black)
Pozi head screw
(M3x16)
Sensors
KICKER ASSY