2
To remove the body attachment, put your fingers in the recesses at
the top and bottom and pull gently. The attachment should come off
easily.
3
Moisten the soft cloth supplied with the appliance with a few drops
of water and use it to clean the following parts:
-
the light exit window
-
the outside surface of the body attachment
-
the metallic frame inside the body attachment
Note: If water does not clean effectively, use a few drops of high-
percentage alcohol to clean the parts mentioned above.
Note: A contaminated light exit window can look like this picture. Make sure
you clean the appliance before and after each use and, if necessary, also
during the treatment according to the instructions in this section.
4
If necessary, clean the outside of the appliance with the dry soft cloth
supplied with the appliance.
Tip: If it is no longer possible to clean the edges of the attachment with the
cleaning cloth supplied, use a cotton bud instead. Make sure that no fluff of
fibres stay behind on the attachment or on the light exit window.
Storage
1
Switch off the appliance, unplug it and let it cool down.
2
Clean the appliance before you store it.
3
Put the appliance in the pouch supplied.
4
Store the appliance in a dry place at a temperature between
0°C and 60°C.
Ordering accessories
To purchase accessories for this appliance, please visit our online shop at
www.shop.philips.com/service. If the online shop is not available in
your country, go to your local Philips dealer or a Philips service centre.
If you have any difficulties obtaining accessories for your appliance, please
contact the Philips Consumer Care Centre in your country. You find its
contact details in the worldwide guarantee leaflet.
Environment
-
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
ENGLISH
21