Operating Instructions - Skil CR541801 Manual Del Propietário

OPERATING INSTRUCTIONS

WARNING
fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, bleach or bleach-containing products, etc, can cause a short
circuit.
WARNING
could result in serious personal injury.
WARNING
misuse and could result in a hazardous condition leading to possible serious injury.
WARNING
bling parts.
This cordless circular saw must be used only with the battery packs and chargers list-
ed below:
2Ah
SKIL BY500101
SKIL BY519901
NOTICE: Please refer to the battery and charger manuals for detailed operating information.
To Attach/Detach Battery Pack
(Fig.2)
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves of the tool, and then slide the battery
pack onto the tool.
NOTICE: Make sure that the latch on the bat-
tery pack snaps into place and that the battery
pack is secured to the tool before beginning
operation.
To detach the battery pack:
Depress the battery-release button, located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and remove it from the tool.
NOTICE: When placing the battery pack on the tool, be sure that the raised rib on the bat-
tery pack aligns with the groove inside the tool and that the latches snap into place properly.
Improper attachment of the battery pack can cause damage to internal components.
WARNING
side.
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack, or charger in
If any parts are damaged or missing, do not operate this product until
the parts are replaced. Use of this product with damaged or missing parts
Do not attempt to modify this tool or create accessories not recom-
mended for use with this tool. Any such alteration or modification is
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assem-
Battery Pack
SKIL BY519801
Battery tools are always in operating condition. Therefore, remove
the battery when the tool is not in use or when carrying it at your
4Ah
Fig. 2
Attach
Charger
SKIL QC535701
SKIL SC536501
Battery-
Release
Button
Detach
13