Electrical Connections - Lotus BCAO1618 Manual Del Usuario

7

Electrical connections

Before proceeding with the electrical connection: - carefully read the safety warnings in the first
pages of this manual;
- always compare the system data with those of the
equipment specified on the rating plate.
The connection to the mains must comply with
the regulations in force in the country where the
equipment is installed and must be implemented
by qualified personnel, authorised by the Manufacturer.
Failure to comply with these regulations may cause damage
and injuries, renders the warranty null and void and relieves
the Manufacturer from any liability.
When several appliances are in the same
environment, it is mandatory to set up an
equipotential connection using the appropriate
terminal marked with .
This terminal allows a yellow/green cable with a section
of 2.5 to 10 mm to be connected. The efficiency of the
2
equipotential system must be adequately verified in
accordance with the regulation in force
EN
.
(Fig. 14)
2,5 e 10mm2
8
1
1
code T7100008 - 0215 - rev. 00
Fig. 13
2
Fig. 14