Ambient Temperature - Becken BC3901 Manual De Instrucciones

Levelling the unit
To do this you need to adjust
the two levelling feet at the
front of the unit.
If the unit is not levelled,
the doors and magnetic
seal alignments will not
be covered properly.
Positioning
Install this appliance at a location where the ambient temperature
corresponds to the climate class specified on the appliance's rating
plate:
Location
This appliance should be installed away from sources of heat
such as radiators, boilers, direct sunlight, etc. Please ensure that
air can circulate freely around the back of the appliance. To
ensure best performance, if the appliance is positioned below
an overhanging wall unit, the minimum distance between the
top of the appliance and the wall unit must be at least 100 mm.
Ideally, however, the appliance should not be positioned below
overhanging wall units. Accurate levelling is ensured by one or
more adjustable feet at the base of the appliance.
WARNING!: It should be possible to disconnect the appliance
from the mains power supply, and so the plug must be easily
accessible after installation.
18
AF Manual Instruções FRIGORÍFICO COMBINADO BC3901 WH A5 EN.indd 18
Climate class
SN
N
ST
T

Ambient temperature

+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
08/02/2018 11:38