Energy Saving Tips - Becken BC5217 Manual De Instrucciones

• To prevent cold air escaping from the refrigerator, try to limit the
number of times you open the door. We recommend that you only
open the door when you need to put food in or take food out.
Changing the Light Bulb
The light bulb should be replaced by professionals.

ENERGY SAVING TIPS

• Try not to open the door too often, especially when the weather is
humid and hot. Once you open the door, close it as soon as possible.
• Every now and then check if the appliance is sufficiently ventilated
(adequate air circulation behind the appliance).
• In normal temperature conditions, please set the thermostat to the
middle setting.
• Before loading the refrigerator with fresh food, ensure it is no hotter
than ambient temperature.
• Ice accumulation layer increase energy consumption. Clean the
refrigerator as soon as the ice/frost layer is 3-5 mm thick.
• The rear wall should always be free of dust or any impurities, in
models with an external condenser.
• The refrigerator should be located in the coolest area of the room,
away from heat producing appliances or heating ducts, and out of
direct sunlight.
• Let hot foods cool to room temperature before placing them in the
refrigerator. Overloading the appliance forces the compressor to run
longer. Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing
them in the appliance. This cuts down on frost build-up inside the
appliance.
• The appliance's storage bin should not be lined with aluminium foil,
wax paper, or paper towelling. Liners interfere with cold air circulation,
making the appliance less efficient.
Refrigerator Freezer | Frigorífico Combi | Frigorífico Combinado
EN
21