Troubleshooting Guide - Oreck VENTURE El Manual Del Propietario

Service problems can often be solved easily at home. Use this guide to help you troubleshoot. For any other service problems, contact our
Customer Care Line at 1-800-989-3535 (Mon-Fri 7 a.m. – 7 p.m. CST; Sat 8 a.m. – 4:30 p.m. CST)
Problem
Vacuum doesn't run •
•
•
Vacuum won't pick up •
or there is low suction •
•
•
•
Dust escaping •
from vacuum •
!
WA RN I N G!
5. TROU B LE S H OOT I NG
Possible Cause
Power Cord
On/Off Switch
Wall Outlet
Filter Bag
Filter
Brushroll/nozzle Venture Pro Only
™
Belt Venture Pro Only
™
Hose
Filter bag
Filter
!
ALWAYS UNPLUG YOUR VACUUM BEFORE PERFORMING TROUBLESHOOTING CHECKS OR MAINTENANCE.
Resolution
• Plug in power cord.
• Push the On/Off Switch firmly to turn on.
• Make sure wall outlet is receiving electricity.
• Make sure bag is installed correctly and replace if full.
• Remove filter and clean if dirty.
• Check nozzle for clog and replace brushroll if worn.
• Replace belt if broken.
• Make sure hose is installed correctly and remove clog if necessary.
• Make sure bag is installed correctly and replace if full.
• Make sure filter is installed correctly.