Amway eSpring Manual Del Usuario página 8

4. Store the removal tool for future
use (Fig. 25A).
5. Place the Top Shroud onto Base
Housing (Fig. 26A).
6
Fig. 25A
Fig. 26A
6. Plug the Power Adapter into wall
outlet (Fig. 27A).
7. Wait for monitor to signal with a
beep. This may take 30 seconds.
8. Turn on cold water faucet and pull out the Diverter pin to run water through
the Water Purifi er. Make sure the display has a blue cup
(p. 11). If not, refer to Troubleshooting, Auditory Warnings (p.13).
Fig. 27A