Metrohm 768 KF Manual Del Usuario página 31

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3.2 Remote control commands3.2 Remote control commands
.ChangedOnly: Sends only those paths and their values which have once been edited. All
path names are sent in absolute terms, i.e. from the root.
3.2.2.34
Setup.Trace
The KF Oven reports when a value has been confirmed with <ENTER> at the KF Oven.
Space (ASCII 32) and & are sent as introducers.
Example: &Mode.Temp"100"
3.2.2.35
Setup.Lock.Keyboard
Setup.Lock.Config
Setup.Lock.Parameter
Setup.Lock.Heater
Setup.Lock.Pump
Setup.Lock.Valve
Setup.Lock.Boat
Setup.Lock.Display
ON means locking of the corresponding function:
.Keyboard:
Locking all keys at the KF Oven.
.Config:
Locking the <CONFIG> key.
.Parameter:
Locking the <PARAM> key.
.Heater:
Locking the <HEATER> key.
.Pump:
Locking the <PUMP> key.
.Valve:
Locking the <VALVE> key.
.Boat:
Locking the <BOAT IN> and <BOAT OUT> keys.
.Display:
Locking the display, it is not operated by the device program of the KF Oven
and can be written to by the computer.
3.2.2.36
Setup.TController.InitHeatFactor
Setup.TController.AddHeatFactor
Factors for the temperature controller, see page 12.
3.2.2.37
Setup.SendMeas.SendStatus
Setup.SendMeas.Interval
Setup.SendMeas.Meas.CyclNoON, OFF
Setup.SendMeas.Meas.SampleTemp
Setup.SendMeas.Meas.OvenTemp
Setup.SendMeas.Meas.GasFlowON, OFF
.SendStatus: ON means automatic transmission of measured values (see below) at the
inputted time interval.
.Interval:
Time interval for the transmission of associated measured values defined
below.
Selection of the values which are transmitted at the set time interval.
.CyclNo:
Cycle number. Together with the cycle time (3.2.2.24), a time frame can be
generated. The other data are part of the corresponding cycle number. The
cycle number is always zeroed at the start and termination of the automatic
determination.
.SampleTemp: Associated sample temperature.
.OvenTemp: Associated oven temperature.
.GasFlow:
Associated gas flow.
Format of the transmitted values (examples):
.CyclNo
Cycle number
.SampleTemp Sample temperature in °C
.OvenTemp
Oven temperature in °C
.GasFlow
Gas flow in mL/min or L/h
28
127
150.0
170.0
100.5
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
0...100...200
0...100...200
ON, OFF
1...4...16200
ON, OFF
ON, OFF
768 KF Oven
Tabla de contenido
loading

Tabla de contenido