Metrohm 768 KF Manual Del Usuario página 27

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3.2 Remote control commands3.2 Remote control commands
3.2.2.8
Config.OvenSet.CharSet
Selection of the character set.
IBM means IBM character set according to character set table 437. Select "IBM" for work
with the computer.
3.2.2.9
Config.OvenSet.Report
ON means: Output of a report at the end of the automatic determination.
3.2.2.10
Config.Aux.Language
Selection of the dialog language.
3.2.2.11
Config.Aux.RunNo
Current run number.
Is set to 0 on power on and on initialisation. Counting starts again at 1 after 9999 has been
reached.
3.2.2.12
Config.Aux.AutoStart
Config.Aux.StartDelay
.AutoStart:
Number of automatic, internal starts for automatic determinations.
.StartDelay:
Start delay time in s. During this time, the data of the preceding determination
are retained.
3.2.2.13
Config.Aux.Beeper
Config.Aux.DevName
Number of beeps if the Oven is ready and after the determinations.
Name of the device for interconnections with several devices. It is advisable to use only the
characters A...Z (ASCII No. 65...90), a...z (ASCII No. 97...122) and 0...9 (ASCII No. 48...57)
if the Setup.AutoInfo function (see 3.2.2.38) has been activated at the same time.
3.2.2.14
Config.Aux.Prog
Output of the program version.
In response to $Q, the KF Oven sends: "5.768.0010".
3.2.2.15
Config.RSSet
$G sets all RS settings. After setting the interface parameters, wait at least 2 s to allow the
components to equilibrate.
3.2.2.16
Config.RSSet.Baud
Config.RSSet.DataBit
Config.RSSet.StopBit
Config.RSSet.Parity
Config.RSSet.Handsh
Setting of the RS interface parameters: Baud rate, data bits, stop bits, parity and type of
handshake, see also page 31.
Setting of the values must be initiated immediately following the entry with &Config.RSSet
$G, see 3.2.2.15.
24
Epson, Seiko, Citizen,
HP, IBM
english, deutsch, francais, español
1...9999, OFF
up to 8 ASCII characters
300, 600, 1200, 2400, 4800, 9600
even, odd, none
HWs, HWf, SWchar, SWline, none
ON, OFF
0...9999
0...9999
1...9, OFF
read only
$G
7, 8
1, 2
768 KF Oven
Tabla de contenido
loading

Tabla de contenido