Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 85
Hot Surface
The air circulation around the lamp
cooling flange must not be inhibited.
Leave uncovered with sufficient space
for air circulation at all times.
Warning
The instrument is NOT to be operated
in atmospheres which could
constitute an explosion risk.
Note: The Infratec Sofia is designed
and tested for European (CE)
compliance. To ensure that this
compliance is maintained, connect
only CE approved equipment.
Connecting equipment that is not CE
approved may cause EMC
incompatibility and thereby affect the
function of the Infratec Sofia and
other equipment.
9.3 Disposal Instructions
Do not dispose of this electrical device
with unsorted household waste.
Improper disposal may be harmful to
environment and human health.
Please refer to your local waste
authority for information on return
and collection systems in your area.
9.4 Warranty Policy
Warranty conditions are either specified on the
order confirmation of the purchase order together
with the invoice, or in the contract with the FOSS
representative and only apply if:
the Customer/User has followed all written
instructions and documentation from FOSS
regarding the product
the product has been installed, maintained,
adjusted and calibrated according to all
descriptions and recommendations in the
documentation
the product has not been used for purposes
other than those reasonably contemplated by
FOSS
the product has not been altered or repaired
with non-original FOSS parts or by personnel
not authorised by FOSS
only original FOSS consumables and
accessories or equivalents recommended by
FOSS have been used
the product has not in any other ways been
handled contrary to ordinary practice
only software authorised by FOSS has been
installed on any product PC
any external product PC has complied with
the recommendations of the FOSS
representative
9:2
Infratec™ Sofia
computer games have not been played on the
PC, including any games preinstalled
together with the operating system.
the instrument has been properly maintained,
as recommended by FOSS
Your instrument may contain parts that, due to
wear during use of the instrument, are expected to
have a shorter lifetime than the instrument in
general. These parts are listed in the User Manual
and/or in the FOSS product software and in the
Owner's Guide.
The liability for worn down parts subject to wear
is limited to cases with extraordinary wear due to
defective material or production errors.
9.5 Copyright of Embedded
Software
Copyright (c) 2001, 2002 Swedish Institute of
Computer Science.
All rights reserved.
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the
above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice, this list
of conditions and the following disclaimer in
the documentation and/or other materials
provided with the distribution.
3. The name of the author may not be used to
endorse or promote products derived from
this software without specific prior written
permission.
This software is provided by the author "as is"
and any express or implied warranties, including,
but not limited to, the implied warranties of
merchantability and fitness for a particular
purpose are disclaimed. In no event shall the
author be liable for any direct, indirect, incidental,
special, exemplary, or consequential damages
(including, but not limited to, procurement of
substitute goods or services; loss of use, data, or
profits; or business interruption) however caused
and on theory of liability, whether in contract,
strict liability, or tort (including neglience or
otherwise) arising in any way out of the use of this
software, even if advised of possibility of such
damage.

9.6 Trademarks

Infratec™ is a registered trademark of FOSS
Analytical AB. Windows® is a registered
trademark of Microsoft Corporation.
User Manual 6002 5350 / Rev. 6
Tabla de contenido
loading

Tabla de contenido