Installation; Installation Planning - Motorola NNYN4846 Manual Del Propietário

All manuals and user guides at all-guides.com

Installation

Installation Planning

Before installing, determine how and where you intend to mount the junction
box, visor microphone, antenna, remote PTT button, remote palm microphone
(optional), and speaker (see Figure 1). Plan wire and cable runs to provide
maximum protection from pinching, crushing and overheating.
to External to External
Microphone
Speaker
to optional
Palm Mic
Figure 1. Car Kit Interconnection Diagram
Refer to the following guidelines when planning the installation:
• Make sure that the car kit fits in the area where it will be mounted and has
enough clearance.
• Use the provided hardware for mounting.
• Ensure that the cables are not stretched, and not subjected to heat from
engine or transmission.
• Crimp connectors securely.
• Do not attach components to any part of the vehicle that is not rigid or is
subject to excessive vibration.
• Do not run cables over sharp edges that could cause wear or chaffing of
cable insulation.
• Do not install the components in locations where they might cause
interference to the operation of the vehicle controls and airbag deployment.
• If it is necessary to penetrate the firewall, check opposite side for cable
clearance before drilling.
• Use a grommet to protect the cable where it passes through the firewall.
CAR KIT OWNER'S MANUAL
to Phone
Cradle
to External
Push-to-
Talk PTT
Fuse Block
In-Line Fuse
(if connection is made in
engine compartment)
(Red) to Positive Supply
Voltage
(Black)
to Vehicle Chassis
Ground
(Orange)
to Entertainment
Mute
)
(Green
to Ignition
3