Accessories; Ice Tray; The Plastic Scraper - Orima ORA231 Manual De Instrucciones

• It is not recommended that you operate your fridge in environments colder than 10°C in
terms of its efficiency.
• When setting the thermostat, take into consideration how often the appliance doors are
opened and closed, how much food is stored in the refrigerator, and the environment in
which the refrigerator is located.
• When the appliance is first switched on, allow it to run for 24 hours in order to reach
operating temperature. During this time, do not open the door and do not keep a large
quantity of food inside.
• Unplug your appliance during a power cut to prevent damage to the compressor. Once
power is restored, delay plugging in your appliance for 5 to 10 minutes. This will help
prevent damage to the appliance's components.
• Your appliance is designed to operate in the ambient temperature ranges stated in
the standards, according to the climate class stated in the information label. It is not
recommended that your fridge is operated in the environments which are outside of the
stated temperature ranges. This will reduce the cooling efficiency of the appliance.
• Your appliance is designed to operate in the ambient temperature (N = 16°C - 32°C)
intervals stated in the standards, according to the climate class displayed on the
information label. We do not recommend operating your appliance out of the stated
temperature limits in terms of cooling effectiveness.
Climate class and meaning:
T (tropical): This refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C.
N (temperate): This refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 32 °C.
SN (extended temperate): This refrigerating appliance is intended to be used at ambient
temperatures ranging from 10 °C to 32 °C.

Accessories

Ice Tray

• Fill the ice tray with water and place in the freezer compartment.
• After the water has completely frozen, you can twist the tray as shown below to remove
the ice cubes.

The Plastic Scraper

After some time, frost will build up in certain areas of the freezer. The frost
accumulated in the freezer should be removed regularly. Use the plastic scraper
provided, if necessary. Do not use sharp metal objects for this operation. They
could puncture the refrigerator circuit and cause irreparable damage to the unit.
Visual and text descriptions in the accessories section may vary according to the
model of your appliance.
EN - 52 -