Description - RIDGID RP 240 Manual Del Usuario

All manuals and user guides at all-guides.com
son.com, or in the U.S. and Canada call
(800) 519-3456.

Description

The RIDGID ® RP 240 Press Tool, when used
with appropriate attachments, is designed to
mechanically press fittings onto tubing to create
a water-tight and permanent seal, such as for
plumbing and heating applications. Attach -
ments are also available for other uses.
When the run switch on the press tool is de-
pressed, an internal electric motor powers a
hydraulic pump which sends fluid into the
cylinder of the tool, moving the ram forward
and applying force to the attachment, pressing
the fitting. The press cycle takes approximately
5 seconds. Once the cycle begins to deform a
fitting, it will automatically continue until comple-
tion, even if the run switch is released.
1
12
11
Figure 1 – RIDGID RP 240 Press Tool and Compact Series Jaw
Figure 2 – Machine Serial Number - Circled digits indicate the year and month of the manufacture.
(YY = year, MM = month).
The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks
by Emerson Electric Co. is under license. Other trademarks and trade names are those of their respective owners.
999-995-112.08_REV. A
2
3
4
8
10
9
The Tool Status Lights indicate things such
as improper temperature, low battery, or main-
tenance required. A work light turns on when
the run switch is depressed to illuminate the
work area. The head can be rotated for better
access in tight spaces.
The tool is supplied with a fabric loop that
can be used with appropriate attachments
such as shoulder straps or tie off lines.
The press tools include Bluetooth
technology to allow connection to smart
phones and tablets. See"Bluetooth Functions
(Wireless Data Transfer)"section for details.
5
6
7
Ridge Tool Company
Elyria, Ohio / USA
Model RP 24X
XX YY MM XXX
Serial No.
10.8 V DC / 24.1 A
3x /min.
260 W / F = 24 kN
2017
RP 240 Press Tool
®
# Description
1 Scissor Style Jaw Set
2 Attachment Mounting Pin
3 Tool Status Lights
4 ON/OFF Button
5 Warning Label
6 Fabric Loop
7 Pressure Release Button
(RP 240 Far Side)
8 Handle
9 Battery
10 Run Switch
11 LED Work Light
12 Jaw Sideplate
Press Tool
wireless
5