Add A Sensor Device; Remove A Sensor Device; Start Exercising - Oregon Scientific SE900 Manual Del Usuario

Ocultar thumbs Ver también para SE900:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
IMPORTANT To ensure high accurate calculations with your exercise, we highly recommend you to pair the watch with Oregon Scientific Bluetooth Smart Fabric Chest
Belt (model SZ999). To order an accessory, visit our website www.oregonscientific.com or contact your local.

ADD A SENSOR DEVICE

Please prepare your sensor without packaging and locate it close to the watch.
For the first time use, there is no sensor added, following the steps below.
1. In SENSOR setup mode, press top (1) button to enter, add sensor displays on the screen.
2. Press top (1) button again to start pairing sensor.
3. After 3 seconds, add sensor displays again on the watch.
If the watch has added chest belt sensor, following the steps below.
1. In SENSOR setup mode, press top (1) button to enter, paired sensor icon
2. After 3 seconds, add sensor displays on the screen.
3. Press top (1) button again to start pairing sensor.
4. After 3 seconds, add sensor displays again on the watch.
If the watch has added bike pod sensor, following the steps below.
1. In SENSOR setup mode, press top (1) button to enter, paired sensor icon
2. After 3 seconds, add sensor displays on the screen.
3. Press top (1) button again to start pairing sensor.
4. After 3 seconds, add sensor displays again on the watch.
NOTE You can pair all sensors with the watch at a time.

REMOVE A SENSOR DEVICE

You can remove the sensor from the watch. Remove one sensor at a time.
1. In SENSOR setup mode, press top (1) button to enter. Paired sensor(s) display and then toggle middle (2) button till remove sensor displays.
2. Press top (1) button to enter.
3. Toggle middle (2) button to select the sensor you want to remove. Sensor ID also displays under the sensor icon.
4. Press top (1) button again to confirm the deletion and Done displays on the screen.
5. After 3 seconds, the screen automatically displays other paired sensor icon.
6. Follow step 3 in this section, or press bottom (3) button to exit.
NOTE Sensor ID range is from 00000 to FFFFF and each sensor has an individual sensor ID

START EXERCISING

With your desired profile downloaded onto the watch, you can start exercising and review exercise data records on the watch or uploading them to the application, which
can systematically manage and analyze your records.
IMPORTANT You need to pair sensor with the watch if necessary before starting exercising, such as paring a bike pod for cycling. If without pairing, the exercise profile
does not work to collect data.
flash during pairing and only the icon of the paired sensor displays on the screen once the pairing is complete.
displays on the screen.
flash during pairing and only the icon of the paired sensor displays on the screen once the pairing is complete.
displays on the screen.
flash during pairing and only the icon of the paired sensor displays on the screen once the pairing is complete.
6
Tabla de contenido
loading

Este manual también es adecuado para:

Ra900

Tabla de contenido