Samsung DV52J8700E Serie Manual Del Usuario página 23

Using the short hose as an extension
C
DV8000J-03170S-02_EN-US_150511.indd 23
All manuals and user guides at all-guides.com
1. Close the cold water tap. If you have
2. Using pliers, tighten the coupling an
B
3. Connect the Y connector (A) to the brass
4. Using pliers, tighten the coupling an
A
5. Connect the angled end of the water
6. Using pliers, tighten the coupling an
7. If you detached the cold water hose
8. Open the cold water tap, and then check
a washer cold water hose attached to
the cold water faucet, unscrew and
remove the hose. Then, connect the
short hose (B) to the cold water tap.
Turn the coupling manually until it is
tight.
additional two-thirds turn. Do not
overtighten because the coupling may
be damaged.
male end of the short hose. Turn the
coupling manually until it is tight.
additional two-thirds turn. Do not
overtighten because the coupling may
be damaged.
hoses (C) to the filling valve at the
bottom of the rear frame. Turn the
coupling manually until it is tight.
additional two-thirds turn. Do not
overtighten because the coupling may
be damaged.
from your washer, attach the hose to
the free end of the Y connector, tighten
the coupling until it is tight, and then,
using a pliers, tighten an additional
two-thirds turn.
for any leaks.
English 23
2015/7/7 13:40:44