Samsung DV52J8700E Serie Manual Del Usuario página 20

Installation
STEP 3 Connect the electrical wiring
First, read through the "Electrical requirements" section, and follow these steps.
3-wire system
A
B
A. External ground connector
B. Neutral grounding wire (white)
C. Center silver-colored terminal block
screw
D. Neutral wire (white or center wire)
E. ¾" (1.9 cm) UL-listed strain relief
20 English
DV8000J-03170S-02_EN-US_150511.indd 20
All manuals and user guides at all-guides.com
1. Loosen or remove the center terminal
C
2. Connect the neutral wire (white or
3. Connect the other wires to outer
D
E
4. Tighten the strain relief screws.
5. Insert the terminal block cover into the
• To convert from the 4-wire system
• Ring-type terminals are recommended.
block.
center wire) of the power cable to the
center, silver-colored terminal screw of
the terminal block. Tighten the screws.
terminal block screws. Tighten the
screws.
rear panel of the dryer. Then, secure the
cover with a hold-down screw.
CAUTION
to 3-wire system, connect the ground
strap to the terminal block support to
ground the dryer frame to the neutral
conductor.
If using strap terminals, make sure they
are tightened.
2015/7/7 13:40:43