Parkside PAHE 20-Li C3 Manual Del Usuario página 9

WARNING!
► The vibration level varies in accordance with
the use of the power tool and may be higher
than the value specified in these instructions
in some cases. There is a risk of underestima-
tion of the vibration load if the power tool is
used regularly in this manner. Try to keep the
vibration loads as low as possible. Measures
to reduce the vibration load are, e.g. wearing
gloves and limiting the working time. In this
case all states of operation must be included
(e.g. times when the power tool is switched
off and times where the power tool is
switched on but running without load).
Explanation of symbols on the appliance
Read the operating instructions
and safety advice before initial
operation!
Wear protective gloves!
Wear safety shoes!
Wear ear protection!
Wear a hard hat!
Wear safety goggles!
Keep bystanders away from the
appliance!
Do not use chain saw one-handed!
Always use chain saw two-handed!
│ GB │ IE
■ 4
Beware of chain saw kickback and
avoid contact with bar tip!
Protect the appliance against rain or
moisture!
Keep at least 10 m away from
overhead lines and at least 15 m to
other people.
Caution! Falling objects.
Especially when cutting above head
height.
Beware of thrown objects!
Caution! Risk of injury due to
running blades.
Sound power level LWA data in dB.
Turn the device off and remove the
battery pack before performing any
maintenance work!!
15 min
A full tank will last for approx.
OIL
15 minutes of continuous operation.
Running direction of the chain!
Oil filler cap
Minimum/maximum level indicator
MIN/MAX
of the oil tank.
Tighten!
Release!
The arrow direction marks the
selected position.
Press in the direction of the arrow.
PAHE 20-Li C3