Led Indicator And Shutdown Protection - Schumacher Electric PI-200 Manual Del Propietário

8. LED INDICATOR AND SHUTDOWN
PROTECTION
The LED glows GREEN automatically when plugged into
a 12-volt DC source and will not glow under the following
conditions:
1. When the power input from the vehicle's battery
drops to approximately 10-volts, low battery shutdown
occurs and inverter shuts off. Solution: Recharge or
Replace the battery.
2. When the power input from the vehicle's battery
exceeds 15-volts, high voltage overload protection oc-
curs. Solution: Reduce the voltage range to between
12-volts and 14-volts.
3. The continuous load demand from the equipment
or device being operated exceeds the continuous
load rating of the inverter being used. Solution: Use a
higher capacity inverter or lower rated device.
4. The case temperature becomes hot (exceeds
145°F). Solution: Allow the inverter to cool. Do not
block the cooling slots or air flow over and through
the inverter. Reduce the load on the inverter to the
continuous rated output.
RESET: To reset after shutdown occurs, remove the
12-volt plug from the accessory outlet. Check the source
of the problem and correct. Reinsert the 12-volt plug into
the accessory outlet.
All manuals and user guides at all-guides.com
• 13 •