Panasonic AV-HS04M7D Instrucciones De Uso página 14

Operation (3D mode)
Setting the input signals
 Camera connections
In the 3D mode, the signals of the odd-numbered input connectors are handled as the Lch signals, and the signals of the
even-numbered input connectors are handled as the Rch signals.
When a 3D camera is to be connected to the AV-HS450, connect its Lch output to an odd-numbered input connector and its
Rch output to an even-numbered connector.
A 2D camera can be connected even in the 3D mode.
Connect it to an odd-numbered input connector.
Odd-numbered input connectors: INPUT 1, 3, 5, 7, 9, 11, 13, 15, A1
Even-numbered input connectors: INPUT 2, 4, 6, 8, 10, 12, 14, 16, A2
HD SDI (R ch)
HD SDI (L ch)
Rig 3D
cameras
 Selecting the input signals (2D or 3D)
 Press the [INPUT] button to light its indicator, and display the INPUT menu.
 Refer to "2-1-5. LCD menu area" in the Operating Instructions of the AV-HS450.
 Turn [F1] to display the INPUT XX sub menu.
For X (X: IN1 to IN16, A1 or A2), select the input whose camera
signals are to be selected.
 Turn [F2] to display the SrcType third menu.
<Menu display>
INPUT XX | SrcType | SrcType |
| 1/6
 Turn [F3] to select the camera signals for the SrcType menu.
3D: Select this when connecting a 3D camera.
2D: Select this when connecting a 2D camera.
HD SDI (L ch)
SLOT A
IN/OUT A1
SDI INPUTS
1 2 3
SDI OUTPUTS
1 2
|
| 3D| |
2D
HD SDI (R ch)
Integrated twin-lens
3D camera
Connect Lch to the INPUT1, 3, 5 ... 15 or A1 connector.
Connect Rch to the INPUT2, 4, 6 ... 16 or A2 connector.
Connect its signals to the INPUT1, 3, 5 ... 15 or A1 connector.
SLOT B
IN/OUT A2 IN/OUT B1 IN/OUT B2
3D SDI OUTPUTS
OUT OUT
4 5 6 7 8 9 10 11 12 13 14 15
DVI-D OUTPUTS
3 4 5 6
TALLY/GPI
LAN PANEL
Note
When "2D" is selected as the SrcType setting
for an odd-numbered input connector, the
same signals will also be input internally to the
even-numbered input connector in the same
pair of connectors. Even when the camera has
been connected to that even-numbered input
connector, its signals will not be recognized.
Example:
When the INPUT1 connector is set to "2D", the
signals input the INPUT1 connector will also
be input to the INPUT2 connector.
23 (E)
2D camera
HD SDI
16 C/C
U/C
EDITOR
REF
SIGNAL
GND
COM