Faber K-AIR 330.0615.671 Manual De Instrucciones página 6

L
Key Key press
L Short
Long press with
light on
Long press with all
loads off (motor
and lights)
T1 Short
T2 Short
Long press with
light or motor on
Long press with all
loads off (motor
and lights)
T3 Short
Long press with
light or motor on
Long press with all
loads off (motor
and lights)
6
T1 T2
Function
The lights alternate between high intensity, medium intensity (if
present), off.
If there is an induction cooktop paired with the hood and the hood
is off, as soon as the induction cooktop is turned on, the hood
lights automatically turn on at the maximum intensity.
Induction/Gas Cooktop Selection
Select the type of cooktop in use, either Induction or Gas.
The Induction Cooktop is set by default.
It performs the saturated Filters alarm reset.
Turns the motor on/off at the first speed.
Turns the motor on at the second speed.
24h Function
Activates/Deactivates the motor in the 24h Air Exchange mode, a
speed that allows suction of 10 minutes every hour, for a 24-hour
cycle.
Cannot be activated if the Intensive mode is active.
Activates/Deactivates the Activated Carbon Filters alarm.
Signals the saturated Metal Grease Filters alarm and the need to
wash them. The alarm is activated after 100 hours of effective
hood operation.
Signals the saturated Activated Carbon Odour Filter alarm. The
alarm is activated after 200 hours of effective hood operation.
Turns the motor on at the third speed.
Turns the motor on at the Intensive speed.
This speed is timed for 6 minutes. At the end of this time, the sys-
tem automatically returns to the previously selected speed.
K-Link pairing
Before starting the procedure follow the specific instructions of the
manuals of the devices to be paired.
Starts the pairing procedure between the hood and compatible K-
Link devices. Up to 3 induction cooktops can be paired. See the
manual of the devices for details of the operations that need to be
performed on these.
The pairing procedure takes 2 minutes. If no devices are recog-
nised within this time check that you have previously activated the
procedure for the devices to be paired. The maximum number of
linkable devices may have been reached.
T3 T4
S1
Led
-
1 flash of LEDs T2 and
T3: confirms the Induc-
tion Cooktop selection.
2 flashes of LEDs T2
and T3: confirms the
Gas Cooktop selection.
LED T1 flashes 3 times.
Fixed
Fixed
Flashing
LED flashes twice:
alarm activated.
LED flashes once:
alarm deactivated.
LEDs T2 and T3 lit with
the hood off.
LEDs T2 and T3 flash-
ing with the hood off.
Fixed
Flashing
LEDs T1 and T2 flash-
ing:
Pairing in progress.
Upon successful com-
pletion of the procedure
LEDs T1 and T2 will
light up for 2 seconds.