Solarsat Setting; Auto Scanning - Samsung DSB-A200C Instrucciones De Uso

2/27/04 3:22 PM Page 18
OPERATING THE RECEIVER
Mode
ving Mode:
an option to choose the positioner's movement
tinuous, Step or Time.
e antenna with north, south, east and west and
/ / / key to drive motor. key drives to west,
es to east, key drives to north and key drives
hed driving of motor, select "Store current Position."
OK key, to reset new driving motor.
level indicated in the "Signal Status" is only for reference.
signal quality may be adequate even though the level indicated is not maximum.
ed Position.
red position is reached then screen displays "Stop",
continue with the further operations.
Calculate Sat Positions to recalculate the satellite position and OK key.
er Mode
the positioner's state, installer should use this menu.
the "Disable Limits" before using User mode.
Drive Motor West/East and use the / keys
otor.
es to west and key drives to east.
able Limit", in order to enable "Set Limit".
sable Limit", in order to disable "Set Limit".
set Positioner" and OK key to reset positioner.
GB-18
All manuals and user guides at all-guides.com
D I G I T A L S A T E L

1.3 Solarsat Setting

This menu is only for the Solarsat antenna.
When you press this menu, you will get this message,
"This menu is only for the Solarsat antenna.
If you have one-press OK, otherwise-press EXIT."
You can set the value according to your location.
To set the Value of Date and Time, use the PG+/PG- keys
to change the value.
Use the / keys to change position.
Use the / keys to move each filed.

1.4 Auto Scanning

The sub menu "Auto Scanning" will enable download the
channels automatically from the preprogrammed satellites.
To download channels automatically:
You can select All/Off/Only Free option mode with the the
/ keys in each satellite, which can be displayed more by
the PG+/PG- keys .
Off : No Scan
All : Scan all the channels
Only Free : Scan free channels
Press OK key.
Auto Scanning menu will be displayed.
All the channels in the list from the selected satellite will be
automatically downloaded.
After scanning you will see "Your digital receiver found...".
Then, you should press OK key to store all channels into STB.
L I T E R E C E I V E R
OPERATING THE RECEIVER
GB-19