Adjusting Machine Settings; Setting The Water Hardness; Adjusting The Grind Setting; Restoring Factory Settings - Saeco Xelsis Serie Manual Del Usuario

Adjusting machine settings

You can adjust most machine settings by tapping the Settings
screen.
For online support (frequently asked questions, movies etc.), scan the QR code on the cover of this
booklet or visit www.saeco.com/care

Setting the water hardness

We advise you to adjust the water hardness setting to the water hardness level in your region for
optimal performance and a longer lifetime of the machine. This also prevents you from having to
descale the machine too often. The default water hardness setting is 4: hard water.
Use the water hardness test strip supplied in the box to determine the water
hardness in your region:
1 Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig. 12).
2 Wait 1 minute. The number of squares on the test strip that turn red indicate the water hardness
(Fig. 13).
Set the machine to the correct water hardness:
1 Tap the Settings
2 Select the water hardness level. The number of red squares selected on the display should be the
same as the number of red squares on the test strip (Fig. 14).
3 When you have set the correct water hardness, tap the confirmation

Adjusting the grind setting

You can change the coffee strength with the grind setting knob inside the bean container. The lower
the grind setting, the finer the coffee beans are ground and the stronger the coffee becomes. There
are 12 different grind settings you can choose from.
The machine has been set up to get the best taste out of your coffee beans. Therefore we advise you
not to adjust the grind setting until you have brewed 100-150 cups (approx. 1 month of use).
You need to brew 2 to 3 drinks before you can taste the full difference.
Do not turn the grind setting knob more than one notch at a time to prevent damage to the grinder.
1 Tap the Beans icon in the main menu.
2 Tap on ¨Grinder¨.
3 Watch the how to video.

Restoring factory settings

The machine offers you the possibility to restore the factory settings at any moment.
1 Tap the Settings
2 Scroll from left to right to select 'Factory settings'. Confirm by tapping the confirmation
- The settings are now restored.
The following factory settings are restored to default: water hardness, standby time, display
brightness, sound, front illumination, profiles, tank light, measure/units, home screen settings,
BeanMaestro preferences, Wi-Fi credentials, software update preferences, Saeco credentials, Amazon
credentials.
icon and scroll from left to right to select 'Water hardness'.
icon.
icon and follow the steps on the
icon to confirm.
11
English
icon.