Charging process
■
Before taking the hand lamp into service for the first time
charge it for 6-8 hours.
■
Connect mains adapter to lamp. Note the guide groove
in the socket.
Note
With this lamp simultaneous charging AND
lighting is possible. However, this reduces the
luminous flux of the lamp.
■
Press the PUSH button to disconnect the power cable
from the lamp.
■
The lamp has an integrated overcharge protection and
can remain permanently connected to the power supply.
Note
Fully charge the hand lamp before it is stored for
a longer period. Recharge the lamp regularly if it
is not used for a longer period of time.
Battery charge indicator
Battery capacity
1 LED flashes
0 % - 33 %
1 LED lights up / 1 LED flashes
34 % - 66 %
2 LED light up / 1 LED flashes
67 % - 99 %
3 LEDs are lit
100 %
Note
Always keep the charging socket on the lamp
free of dirt!
6
All manuals and user guides at all-guides.com
Operation
Toggle switch (on/off)
■
Pressing 1 x: Main light in Power Mode
■
Pressing 2 x: Extra light
■
Pressing 3 x: Off
■
Keep pressed push button pressed for 1 second Main
light in Power Mode
■
Press the push button 5 seconds after switching on: Off
Battery remaining capacity
indicator
3 LEDs are lit
2 LEDs are lit
1 LED is lit
1 LED flashes
Battery capacity ≤ 10 %: The main light switches off 3 times
in a row.
Legend
Explanation of pictograms
Protection class II
Protection class III
Use only indoors
Compliance with EU directives
Do not look in the light source
Electronic scrap (WEEE directive)
Batteries are not household waste!
Minimum distance to illuminated objects from
0.05m
lamp
Energy efficiency class 6
VI
■
Store the lamp in a dry location.
■
Do not use any technical solvents, acetone, benzene,
tetrachloromethane, etc.
■
Likewise, do not leave in contact with oils or grease for
long periods.
■
Damaged charging cables and mains adapters must be
replaced immediately.
Battery capacity
The information in these operating instructions can be
changed without prior notice. Würth does not accept any
100 % - 67 %
liability for direct, indirect, accidental or other damage or
66 % - 34 %
consequential damage which result from the usage or the
33 % - 11 %
application of the information in these operating instructions.
10 % - 0 %
Do not dispose of this device with household
waste. Dispose of the device via an approved
waste disposal company or via your local authority
waste disposal facility. Observe the currently valid
regulations.
In case of doubt, contact your waste disposal facility. Dispose
of all packaging in an environmentally compatible manner.
Do not dispose of batteries in household waste. Hand in used
batteries at your supplier or at a battery collecting point.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
Adolf Würth GmbH & Co. KG, Abt. PCH
Künzelsau: 31.07.2018
Maintenance / care
Disclaimer
Environmental instructions