Possible Anomalies, Alarms And Errors; Information For Demolition And Disposal - GGM gastro PDP44TC Manual Del Usuario

8 POSSIBLE ANOMALIES, ALARMS AND ERRORS

Anomaly
The oven doesn't switch on and
the displays remain off.
The display is off even though
the main switch is in position "1"
and there is power.
One or more lamps does not
turn on, even though the oven
heats up.
The cooking chamber does not
heat up properly.
The temperature continues to
rise beyond the settings made
via the thermostat.
The door is closed but smoke
escapes.

9 INFORMATION FOR DEMOLITION AND DISPOSAL

Pursuant to Art. 13 of Legislative Decree No. 151 of 25 July 2005, "Implementation of Directives 2002/95/EC,
2002/96/EC, and 2003/108/EC, concerning the reduction of the use of hazardous substances in electrical and
electronic equipment, as well as the disposal of some waste."
The crossed bin symbol on the appliance or its packaging indicates that the product must be collected separately from other
waste at the end of its service life.
The collection of this equipment at the end of its life is organised and managed by the manufacturer. Any user who wishes to
dispose of the equipment must therefore contact the manufacturer and follow the manufacturer-adopted procedure to allow
for the separate collection of the equipment at the end of its life.
Appropriate separate collection in order to recycle, process and dispose of the disassembled equipment helps avoid possible
negative effects on the environment and health, and promotes the reuse and/or recycling of the equipment materials. The
unlawful disposal of the product results in the application of administrative sanctions provided for by the applicable law.
Enrolled on the National Register of EEE Manufacturers, under entry No: IT08020000000645
Possible Cause
No electricity.
The main switch is in position "0".
The oven's main switch is faulty.
The safety thermostat has cut in.
Device(s) switched off.
Faulty device.
One or more lamps have burned out. Replace the burnt-out lamps.
The transformer is faulty.
The lamp holder is faulty.
The top and/or bottom have been set
too low.
The heating elements are only
partially working.
The relay board is faulty.
The chimney valve is too open.
The relay board contacts are stuck
together (the heating elements are
still powered).
The chimney valve is closed.
The chimney valve is closed.
Possible Solution
Check the main switch, socket, plug,
power cable, and internal terminal board
in the control compartment.
Turn the main switch to position "1".
Replace the oven's main switch.
Open the right panel and reset both the
thermostat and the safety switch.
Press the ON/OFF" button" for 1 second.
Replace the device.
Replace the transformer.
Replace the lamp holder.
Increase the temperature of the top and/or
bottom.
Check the voltage of the heating
elements.
Check if the heating elements are faulty.
Replace the relay board.
Adjust the chimney valve.
Check and replace the relay board if
necessary.
Adjust the chimney valve.
Open the valve more and check that it is
working correctly.
62