Operation - GGM gastro PDP44TC Manual Del Usuario

Operation

SWITCHING THE
DEVICE ON and OFF
STARTING and
STOPPING THE TIMER
ADJUSTING UPPER
OPERATING
TEMPERATURE
ADJUSTING LOWER
OPERATING
TEMPERATURE
ADJUSTING THE
OPERATING TIME
SWITCHING ON and
OFF THE
ILLUMINATION
OPENING and
CLOSING THE
LOCATION of THE
TURBO
SETTING THE
PROGRAM
BURNER RESETING
(FOR GAS MODELS)
Press and hold the
when it is off.
Press and hold the
LED on the button is lit.
When the device is switched on, the desired temperature value is set
with the help of the
The temperature display will flash while the set value is set. When the adjustment is
finished, it is automatically saved on the current program.
When the device is switched on, the current program number appears on
the program display. Use the
the program number. The temperature display will flash while the set value is set. When
the adjustment is finished, it is automatically saved on the current program.
When the device is switched on, the desired time value is set by means of
the buttons next to the time display. When the adjustment is finished, it is
automatically saved on the current program.
Touch the button to turn the illumination on and off. The LED on the button is on
while the lighting is on.
Touch the button to turn the turbo position on or off. When the turbo mode is
active, the LED on the button will flash. The device will activate the heater outputs even
when the turbo position has been activated, even if it has reached the set value for the
set time from the parameter and will return to the normal operating position at the end of
the period.
While the unit is switched on, the current program appears on the
"PROGRAM" screen. The current program can be changed using the
buttons. Each program contains the values Upper Temperature, Lower
Temperature and Cooking Time. When any of these values are changed, they are
automatically saved in the current program.
When the burner of the device fails, touch the
button to turn the device on or off. The LED on the button is lit
button to start or stop the timer. When the timer is active, the
buttons at the bottom of the upper temperature display.
buttons next to the program screen to change
button to reset the burner.
54