Noise emission value
Noise measurement value determined in accord
ance with EN 1265 . The Arated noise level of this
compressedair tool is typically:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear hearing protection!
Vibration emission value
Vibration values determined in accordance with
EN ISO 20643:
WARNING!
►
The vibration level specified in these instruc
tions has been measured in accordance with
a standardised measuring procedure speci
fied in EN ISO 20643 and can be used to
make equipment comparisons . The specified
vibration emission value can also be used to
make an initial exposure estimate .
The vibration level varies in accordance with
the use of the compressed air tool and may
be higher than the value specified in these
instructions in some cases . It is easy to under
estimate the vibration load if the compressed
air tool is used regularly in a certain manner .
PDSP 1000 E6
L
= 84 .4 dB (A)
pA
K
= 3 dB (A)
pA
L
= 95 .4 dB (A)
WA
K
= 3 dB (A)
WA
a
= ≤ 2 .5 m/s
h
Uncertainty = 1 .5 m/s
NOTE
►
For an accurate estimate of the vibration load
during a specific working period, the periods
during which the appliance is switched off or
is running but not actually being used must
also be taken into consideration . This can
significantly reduce the vibration load over
the total working period .
General safety
WARNING!
information
WARNING!
2
►
Read all safety warnings and all instructions .
2
Failure to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury .
Save all warnings and instructions for future
reference.
Workplace safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents .
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Appliance
can create sparks which may ignite the dust or
fumes .
b) Keep children and bystanders away while
operating a tool. Distractions can cause you to
lose control .
GB │ MT
│
33
■