Electrical Components; Electrical Circuit Diagram; Wearing Parts; Spare Part List - See Appendix - Parker EOMAT PRO Manual De Manejo

EOMAT PRO

14.4 Electrical components

Maintenance of electrical components should only be carried out by qualified
personnel.

14.4.1 Electrical circuit diagram

See appendix
15

Wearing parts

For the order numbers of the wearing tools, please see the chapter Ordering machines
and accessories in the EOMAT PRO brochure. This was included with these operating
instructions.

15.1 Spare part list - see appendix

15.2 Spare parts service

• Spare part orders of machine specific parts can be made according to the parts list
through Parker Hannifin GmbH or your Parker representative. DIN and NORM parts, like
screws for example, cannot be ordered over the Parker spare parts service.
16

Environmental protection / disposal

When working on or with the machine, you must observe all the legal regulations
concerning waste avoidance and proper recycling and disposal.
In particular during installation, repair or maintenance work, make sure that no hazardous
materials such as:
• grease, oil,
• hydraulic oil and
• solvent-based cleaning agents
are allowed to contaminate the ground or water supply!
These materials must be kept in suitable receptacles. They must be transported,
contained, and disposed of in accordance with the relevant legal regulations.
Disposal:
This machine contains materials that can be recycled.
Country-specific rules must be followed.
Please consult your company's metal shop.
Seite
54
EOMATPRO/MANUAL