Chap.2 Installation; Handling And Unpacking - Adler AC2-ELECTRONIC Manual De Instrucciones

GB
•
Move the machine very carefully using a forklift.
•
Make sure the equipment is not damaged, if it is immediately
inform the dealer and shipper. If in doubt do not use the machine
until it has been checked by professionally trained personnel.
•
Move the machine to the site where it will be used and remove the
packing.
Packing materials (plastic bags, polystyrene, nails) can
be dangerous and must be kept out of the reach of
children.
•
The installation
manufacturer's instructions
personnel.
•
Only a fixed connection is suitable for this equipment.
•
Position the machine and level it perfectly using the feet.
•
The flooring must be suitable for the overall weight of the machine.
•
Follow the indications on the installation drawing and set-up the
electrical, water and drain systems in the wash area.

CHAP.2 INSTALLATION

2.1

HANDLING AND UNPACKING

must be carried
and by
Page. 5
out according to
professionally trained
the