Machine Use - Adler AC2-ELECTRONIC Manual De Instrucciones

GB
Page. 19
4.2

MACHINE USE

Commands selection
Pressing the line push-button A, warning light B turns
on and light H starts flashing: this means that the
machine is starting water tank loading.
When light E is on, the machine has completed the
loading cycle and reached the correct washing
temperature, so it is ready for use.
Repeatedly press push-button L to select basket
driving speed.
The warning light on the side indicates selected speed.
You can now start the washing cycle by inserting a
basket inside the machine or pressing push-button G
start washing
Warning light F indicates that washing cycle is active.
Using the same push-button G, it is possible to stop
washing cycle at any time.
Once the basket has reached the end of run out of the
machine, the driving system stops automatically and
light O turns on; as soon as the basket is taken off the
cycle starts again.
If no new basket loaded with objects to be washed is
inserted, washing cycle stops after about 2' while
basket driving system stops with a few seconds delay
to allow for the removal of baskets from curves or
automated surfaces. As soon as a new basket is
inserted, washing cycle is automatically started.