Installing The Hood - THERMEx SWINDON Instrucciones De Montaje

58 THERMEX SWINDON

INSTALLING THE HOOD

The hood shall be installed on the wall on the bracket supplied. This is done in the following
steps:
1
Measure out for the holes for the bracket
for the hood.
NOTE: The bracket must be mounted
with three screws.
3
Install rawl plugs suitable for the
material into which they are installed.
x3
2
Pre-drill the holes for the bracket.
4
Mount the bracket onto the wall with
screws that match the material into which
they are screwed.
M 545217062223072015
x3