THERMEx SWINDON Instrucciones De Montaje página 61

M 545217062223072015
INSTALLING THE DUCT
The duct is mounted on the wall with brackets and held in place above the hood by the glass
plate. The duct is installed with the following steps:
1
Measure and mark the holes for the
bracket for the duct.
NOTE: The bracket should be placed with
the screw holes facing downward.
3
Install rawl plugs suitable for the
material into which they are installed.
4
x2
THERMEX SWINDON 61
2
Pre-drill the holes for the bracket.
Mount the bracket onto the wall with
screws that match the material into which
they are screwed..
x2