Technical Specifications; Recommended Combinations - CAMPAGNOLO 11 SPEED Manual Del Usuario

1. TOOLS
All assembly, adjustment and maintenance operations for the rear derailleur can be
performed with the following wrenches (not included in the package) (Fig.1).
Phillips cross-head
1
screwdriver 1/2
WARNING!
Always wear protective gloves and glasses while working on the rear
derailleur.
20
3 mm Allen wrench
5 mm Allen wrench
(Only for assembly or removal from the frame)
Campagnolo tool UT-VS030.
®
(Only for assembly to the frame)
ENGLISH

2. TECHNICAL SPECIFICATIONS

NOTE
Recommended combinations for cranksets and rear derailleurs are set forth below.
However, please note that these are only recommendations which must be verified
for your particular bicycle. The variables introduced by the frame geometry can affect
the effective adequacy of the recommended combinations. For this reason the combi-
nations listed in the table below are to be considered merely indicative and must be
verified each and every time, depending on the frame on which the components shall
actually be mounted. If you are unsure about the suitability of a combination for your
use, please see your bicycle mechanic or contact your nearest Campagnolo retailer.

RECOMMENDED COMBINATIONS

• Double crankset (52-39 o 53-39) or CT crankset (50-34) + short cage rear derailleur: all
11s Campagnolo sprocket sets
WARNING!
COMPATIBILITY
• The 11s front derailleurs are only compatible with Ultra-Shift Ergopower Campagnolo
11s controls.
WARNING!
COMPATIBILITY
• The 11s front derailleurs are compatible with sprocket sets from 11-23 to 12-29.
ENGLISH
21