Intellisys Controls - Ingersoll Rand TS1A-13A Manual De Manejo Y Mantenimiento

9.2

INTELLISYS CONTROLS

1. Emergency Stop (not shown)
Pressing this switch will disconnect all power to the controller. This
effectively stops all functions of the machine.
DANGER
Pressing the Emergency Stop does not disconnect power to the
electrical panel! Do NOT open the electrical panel door.
Components inside may still be energized and be capable of
delivering a lethal electric shock if contacted.
2. Start
Pressing this button will activate the start sequence.
3. Stop
Pressing this button will activate the stop sequence.
4. Alarm Reset
Pressing this button will clear and reset the alarm if the alarm cause
has been corrected.
All manuals and user guides at all-guides.com
9.0 OPERATING INSTRUCTIONS
TS1A–13A
http://air.irco.com
5. Toggle
Pressing this button will switch between evaporator temperature and
percent relative humidity of the discharge air.
6. Setpoint Function or Conditioned Air Value
7. Setpoint Value or Ambient Temperature
8. Control power indicator
9. Refrigeration compressor run indicator
10. High/Low refrigeration pressure alarm indicator
11. High refrigeration compressor discharge temperature
alarm indicator
12. Energy savings option indicator
13. Preventative maintenance reminder
14. High evaporator temperature warning indicator
15. Low evaporator temperature warning indicator
16. Pre–filter maintenance reminder
17. Post–filter maintenance reminder
18. Drain valve alarm indicator
19. General alarm indicator
20. Approximated discharge air percent relative humidity
active indicator
21. Coldest air temperature active indicator
37