Kärcher SB MU Manual Del Usuario página 41

Micro-emulsion (intensive cleaning
complete)
Removing bitumen road coating residue.
Spraying a special detergent.
Insects Loosening
Loosens insects.
Warm water with special insect removing
detergent.
Distance of high pressure nozzle approx 30
cm.
Wheel Cleaning
Loosens brake dust.
Cold water with special high-dose deter-
gent addition while mixing in compressed
air.
Application before the car wash and only
on coated or painted wheels.
Under-chassis Wash
Removing coarse dirt from the underchas-
sis.
Washing cycle begins with a delay of ap-
prox. 10 seconds; drive the vehicle back-
wards and forwards over the under-chassis
wash.
Operations procedure
1 Rest value display
2 Program selection switch
3 Throwing in the coin
 Select the washing programme using
the programme selection switch.
 Throw in the coin.
Single tool version
1 Washing brush
2 Locking lever
3 Hand spray gun
4 Lever for hand spray gun
5 Safety lever
 Press the locking lever for washing us-
ing high-pressure jet; pull the washing
brush towards the rear and lock it in.
 To wash using the washing brush,
press the locking lever, push the wash-
ing brush forward and lock it in.
 Unlock the hand-spray gun and pull the
lever of the gun.
Double tool version
The hand-spray gun and washing brush
are available as separate tools.
Hand spray gun:
 Unlock the hand-spray gun and pull the
lever of the gun.
Washing brush:
 Clean the washing brush with the hand
spray gun prior to use.
 Set the washing programme "foam
wash" and clean the vehicle.
Washing time
Washing time starts after the coin is
–
thrown in.
The remaining value display shows the
–
remaining washing credit in washing
units.
Note
The washing time is on even if the pro-
gramme selection switch is in the "STOP"
position.
3
-
EN
If more coins are thrown in during the wash-
ing time, the same are registered and add-
ed to the existing washing time.
41