PYD Electrobombas PH Serie Manual De Instalación Y Mantenimiento página 10

OPERATING AND MAINTENANCE MANUAL
ELECTRICAL WATER PUMP
7. TRANSPORT
The machines in question shall be supplied in suitable packaging to ensure adequate protection
during all stages of transport.
If on receipt of the goods the packaging is damaged, it is necessary to ensure that the machine has
not been damaged during transport and that it has not been tampered with. In the event of damage
to the equipment or if any part of the machine is found to be missing, the transporter and the manu-
facturer must be notified immediately and the corresponding photographic documentation must be
provided. Materials used to protect the equipment during transport must be disposed of using the
disposal channels existing in the country of destination.
8. LIFTING AND MOVING
For all lifting and moving operations, the operator must use the minimum personal protective equi-
pment required for the operations to be carried out (safety shoes, gloves and protective helmet).
Machines with a dead weight of more than 25 kg must be moved using suitable moving systems
with a capacity greater than the weight of the machine to be handled. (See the weight indicated on
the packaging). If it is necessary to use belts for handling the machine, these must be in good con-
dition and must be of adequate strength for the weight of the machine to be handled.
Pumps weighing <25 kg may be lifted manually by the operator without the aid of lifting gear.
9. STORAGE
The equipment must always be stored in a covered place, not excessively humid, protected from
atmospheric agents and with temperatures between -10 °C and +40 °C, avoiding direct exposure
to sunlight. If the machine is to be stored for long periods, it is advisable not to remove it from its
packaging.
10
www.proindecsa.com / [email protected]